:: Astra-Glaze-SW+ Glazed Masonry Units | Shapes + Sizes

Features / Benefits • Colors • Shapes • Specifications • Installation • Maintenance • Acousta-Wal

Code Designation

S	-	Stretcher
G	-	Cove Base
ST	-	Two Faced Units
U	-	Bond Beam Unit (Round)
C	-	Cap or Sill
J	-	Jamb
V	-	Vertically Coursed Unit
X	-	Partially Glazed Face
CC	-	Capped Both Sides
P	-	Square Corner
O	-	Bullnose Corner
L	-	Left Handed Unit
R	-	Right Handed Unit

The first number in a shape code represents the block's thickness (bed depth). The diagram above shows nominal thickness available. Please note the respective thicknesses available listed under each shape.

All Trenwyth concrete masonry units are manufactured with an integral water resistant CMU admixture to resist moisture.

	STRETCHER See entire product line here.
	COVE BASE See entire product line here.
	JAMB See entire product line here.
	CAPS See entire product line here.
	1" AND 2" SHAPES SERIES See entire product line here.
	SCORED UNITS See entire product line here.
We strongly recommend that all scored joints be tuckpointed and tooled, particularly on exterior applications, to prevent moisture penetration and to match the real joints between the blocks. Scoring is not recommended on double-faced units.
	ASTRA-GLAZE-SW+/ACOUSTA-WAL Control noise pollution in your project with ASTRA-GLAZE-SW+/ACOUSTA-WAL units. See entire product line here.

Joint Detail

The glazed face dimensions are 7 3/4" x
15 3/4" which allows a 1/4" joint
using modular coursing

Detailing To Keep Moisture Out

All exterior mortar joints must contain a Trenwyth-approved integral water
repellent to resist efflorescence. Click to enlarge detail

© 2009 Trenwyth • One Connelly Road • P.O. Box 438 • Emigsville, PA 17318 • (800) 233-1924 • (717) 767-6868 • FAX (717) 764-6774
Sitemap